Aluminum veneer is a common building material, and its application range is very wide. If you have a certain understanding of construction, you will be able to see it frequently. Do you understand the installation process of aluminum veneer? Do you want to know? Next, Eastern European aluminum veneer manufacturers will introduce to you the installation method of aluminum veneer and the relevant knowledge of installation precautions. Those who want to know, please come and have a look!
Aluminum veneer installation method
Step 1: Fix the skeleton first, and then fix the skeleton firmly on the main structure above the ballistic base. Remember to check the quality of the main structure before setting out.
Step 2: Weld the connector on the column of the main structure to fix the skeleton so that the skeleton will not fall off.
Step 3: Before installation, the skeleton should be treated with anti-corrosion. The position of the installation framework should be accurate and the combination should be firm. Check center line, surface elevation, etc. after installation. In addition, in order to ensure the installation accuracy of the board, theodolite is used to penetrate the mullion rod of the beam. The deformation joints, settlement joints, variable cross-section and other perfect treatment, to meet the requirements of use.
Step 4: When installing the aluminum plate, the installation should be firm and reliable, simple and easy to use.
1. The gap between the board and the board should be internally treated to make it flat and smooth.
2. After the aluminum plate is installed, cover and protect the parts that are easy to be contaminated with plastic film or other materials.
Precautions for installation of aluminum veneer
1. When transporting, take it lightly. After a strong impact, the corners of the aluminum plate and its layout will be damaged, thus affecting the construction and wasting money.
2. The installation process should also pay attention to protect the board surface, do not touch the ground with the board surface, so as not to scratch the decorative surface.
3. The variety, quality, color, pattern and line of the aluminum plate shall meet the design requirements and have a product certificate.
4. Curtain wall frame such as the use of steel keel, its specifications, shape should meet the design requirements, and should be rust, rust treatment.
5. Aluminum plate installation, when the design is not required, the use of core aluminum rivets, the middle must be padded rubber ring. The spacing between blind rivets shall be controlled within 100-150mm.
6. After the installation is completed, pay attention to be sure to tear off the protective film after 3 days. If the time is too long, it will be difficult to tear off, and it will affect the appearance after tearing off.
Aluminum veneer? Features:
1, light weight, good steel, high strength 3.0mm thick aluminum plate weighs 8kg per square plate, tensile strength 100-280n/mm2
2. Good durability and corrosion resistance. Using kynar-500, hylur500 as the base material of pvdf fluorocarbon paint, can be used for 25 years without fading.
3, the process is good. Using the first processing and then painting process, the aluminum plate can be processed into a variety of complex geometric shapes such as plane, arc and sphere.
4. Uniform coating and diverse colors. Advanced electrostatic spraying technology makes the adhesion between the paint and the aluminum plate uniform, color diversity, the choice of space.
5, not easy to stain, easy to clean and maintain. Fluorine coating film non-adhesive, so that the surface is difficult to adhere to pollutants, more good to clean.
6. The installation and construction are convenient and quick. The aluminum plate is formed in the factory, and the construction site does not need to be cut and fixed on the skeleton.
7, can be recycled, conducive to environmental protection. Aluminum plate can be recycled, different from glass, stone, ceramics, aluminum-plastic plate and other decorative materials, high recovery residual value.